Silverback in suit (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2 mm Filaments Used: Sunlu PLA+ Black 3DE PLA Max Grass GreenSunlu PLA+ Light Green3DE PLA Basic Light Grey Swap Instructions: Start with BlackAt layer #7 (0.68mm) swap to Grass GreenAt layer #11 (1.00mm) swap to Light GreenAt layer #17 (1.48mm) swap to Light Grey for the rest. The model is 200x200 mm. If you change size, be sure not to change Z height