Sim-Lab P1X Pro Front Mount Spacers

Spacers for Sim-Lab P1X Pro front mount. My front mount was missing the spacers that the manual said I should have, so I created my own spacers to insert. I don't know if they are supposed to be taller than the holes they're supposed to go into, so I just made them the same height. If anyone knows if they're supposed to be longer than the depth of the hole, please let me know. EDIT: I got replacement spacers from Sim-Lab. They're aluminum and their dimensions are OD: 13.53mm ID: 8.88mm H: 7.85mm. The official ones are definitely smaller than the 3d printed ones, but these are holding up well so either one is fine to use. There are ten 14.75mm diameter spacers and two 13.75mm diameter spacers. The two 13.75mm spacers go into the left hole in the main picture, which would be the single hole that would connect to the wheelbase mount. It could also just be a quality control issue on my unit, so replace them with two more 14.75mm spacers if the holes are the same as the othe