Thingiverse

Sim Racing Dashboard Case- Raspberry Pi 4

by AcidicCane

0 Downloads

0 Likes

0 Makes

A simrig mountable racing dashboard case for a Raspberry Pi 4 with a 3.5" TFT attached. (The TFT has an extra header block to give space for the RPI's heatblock.)

- The back has a 6mm holes for aluminum extrusion.
- RPI is mounted inside with 6 mm nylon pcb spacers.
- When installing the RPI, its best to put 2 spacers on the board, and two on the case beforehand(its a tight fit, so the USB-C port must be tilted in first, then the other side can be pushed down onto the spacers)
- Once all is complete, snap port cover on, and slide the front cover on top.

Project Details:
- Since this project uses SimHub, you can find several tutorials.
- https://www.bobrathbone.com/raspberrypi/pi_simhub.html
- In summary:
- You must install a desktop Pi OS
- Install Chromium
- Enable autologin in raspi-config
- Flip display and touchscreen controls.
- Find the ip-address of the computer your using and type:

Assetto Corsa Dashboard dashboard cover Dashboard Mount Dirt Rally iRacing racing rapsberry pi rapsberry pi case rapsberry pi screen rapsberry touch Sim racing simhub simhub case simhub dashboard simhub display simhub enclosure simracing Simracing dashboard simracing rig

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format