Sim racing mini flag LED (Simhub powered)

This is a small LED flag display for use with racing sims. It uses a 4x4 LED rather than the larger 8x8 more commonly used.Only requires an LED board and an Arduino Pro Micro. No extra items are required for assembly. 3 rear cover variants are included. One with M3 heat inserts, one which takes M3 bolts screwed directly into the plastic and a flat cover for mounting with adhesive. The LEDs are run using Simhub (Profile included). The whole unit is approx 37x37x18. The Arduino sketch should be set up using the editor in Simhub. Go down to the WS2812B section and enable it. Set the number of LEDs to 16 and leave everything else at default. This board uses a serpentine layout, the leds are numbered as follow: Layer 1 - [1] [2] [3] [4]Layer 2 - [8] [7] [6] [5]Layer 3 - [9] [10] [11] [12]Layer 4 -[16] [15] [14] [13] To assemble, first solder the components together. Only 3 wires are required, V+, Ground and the data wire, which goes to pin 6 on the board, although this can be changed in Sim