Sim Racing Pedals with Load Cell V2

Original made by @andrewb_215820 This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I've used all three pedals for ~1 month, daily, as of the original posting. This is designed as an all-round improvement over my V1 pedals, but uses different hardware (loadcell, m6 instead of m8, etc).Assembly notes, pictures, STL+STEP files, code, KiCAD, and PCB gerbers are in the FreeSim-Pedals-V2.zip file.Printing parameters:I've only tested PETG, but I believe ABS and PLA should work.Parts will print fine at 0.2mm or 0.3mm layer heights - the Brake-LoadcellAnchor part benefits from 0.2 as it has a significant number of overhangs compared to other parts. Depending on your printer's bridging ability, the mounting slots on the Sideplate-BaseA/B may need support. Brake-LoadcellAnchor may also benefit from supports as the main slot for the loadcell is quite a long bridge.6 perimeters (at least) and 95-99% rectilin