Sim shifter (no srews) simple design

Hi,

i made a shifter for my makeshift "simrig" :D

The shifter is almost fully printed.
Screwholes on the underside, to screw it to something :)

You will need:

- Spring 17mm x 60mm x 14mm (mine came from an 1:10 RC car)
- 10mm (steel) rod (250mm long)
- 6 microswitches
https://de.aliexpress.com/item/33005955836.html
-USb Joystick
https://www.amazon.de/gp/product/B06XD1WF8G/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Now the printing process. You can print the parts in the orientation you want.

The "Basis" is intended to print standing on the 50° bevel. I did this, so i dont need supports inside the part. Just support underneath.

I have 2 types of "Kugelfixierung".

"Kugelfixierung_bk" uses a 12.7mm steelball which is glued in place.

"Kugelfixierung" has also a ball at the end, but its already attached :P
I printed this at a 45° angle, so i dont have the layers lining up with the "schaltschale".
Thus no need for sanding.

Assembling:

Take the "