Simple and basic filament guide for Ender 3

Hello, after searching and trying many filament guides for my Ender 3, none of them convinced me. So I set out to design a simple, cheap and easy to print model.

I made this design to improve the traction of the filament by making it enter the extruder horizontally. It consists of a base and a simple pulley.

It is recommended to print the base in layer thickness of 0.32 or less. At least 20% infill.

For the pulley, I recommend printing with the highest possible resolution (0.2 or less) and with a speed of 30 mm/s for an optimal result. Use supports.

Greetings from Peru.

=================================================================

Hola, después de buscar y probar muchas guías para filamento para mi Ender 3, no me convencía ninguna. Así que me puse a diseñar un modelo sencillo, económico y fácil de imprimir.

Hice este diseño para mejorar la tracción del filamento haciendo que ingrese al extrusor en sentido horizontal. Consta de una base y una polea simple.