Simple Drawers (Vase mode)

This is the drawers optimized for vase mode.
Fast print time, high quality and nevertheless save filaments.

I did not like the handle orientation of the existing vase mode drawers. I wanted to reverse the handle direction. There was no way without giving up vase mode. In the end, I made a handle separately, and this is the result.

I used Simplify3d, but it seems to be no problem if I only support vase mode on other slicers.
Here is my vase mode setting.



Use Vase Mode (Infill: 0%, Perimeters: 1 shell)
Nozzle diameter: 0.4mm
Line width: 0.8mm
Layer height: 0.2mm
Top layers: 0 layers
Bottom layers: 3 layers

If you want to change the line width from 0.8mm, the model must be modified.

And of course, the handles must be printed in normal mode. and I used some hot glues.




** CURA PROBABLY HAS A PROBLEM
When slicing the file Drawer_80_80_1U_S3.stl, some lines are skipped and a strange lines appears. See picture above.
Other files has no problems.