Simple Headphone Stands

This was a project I made for displaying some headphones for one of my Youtube videos. Originally, it was meant to be even simpler, but then I didn't like the crude look and eventually made a second, more sturdy based version as a service to others who intend to actively use the stand, taking the headphones on and off the display. After light testing of the V base design, it was still a little tippy in the back, so I made the chicken's foot version, offering just that little bit more support. The chicken foot design is untested personally though. I created this once again as a service, but the back “leg” is only an estimation. I already printed two different models, I honestly don't want to print a third unless necessary. Personally, I have to be sparing with my filament when I can, as I don't make a whole lot of money currently and don't get to just buy another spool when I run out.If the chicken's foot model really needs to be extended let me know.- The basic model is made to be printed sideways, and was designed for the Bambu Labs P1P. This model makes use of majority of the build area, so this can exclude it from being able to be printed on a lot of the bed slinger format of printers. You may be able to size the model down, and it may work for your headphones, just remember to use the measuring tools in slicer (when available) and make sure. My models are overcompensated for typical headphone models and is designed off of bulkier COMTAC style headphones, so sizing down should be a functional possibility for most average headphone models, other than possibly the height. Additionally I uploaded the base models as STEP files for easier altering if needed. If you have a smaller format machine, you may be able to make cuts in CAD to make the model more professional / visually appealing. Of course I can't be 100% for sure of every situation, these are just suggestions and precautions I have tried to put in place. - The V base model was designed to be printed standing