Thingiverse
Simple NAS V2
von dltkddnr04
22
Downloads
16
Likes
0
Makes
This NAS case is 1-bay.
The parts that go into this NAS case are:
-Raspberry PI
-Sata to usb (HD-500SATA-A)
-LAN, USB, DC extension cable
-Other parts as required
It was also confirmed that the heat generated from the hard disk could not be discharged while the NAS was being built and used. Therefore, it is recommended to put a cooling fan behind the case. Specifications are 80mm wide and 25T thick
Thank you for reading the poor English of Google Translator so far.
The parts that go into this NAS case are:
-Raspberry PI
-Sata to usb (HD-500SATA-A)
-LAN, USB, DC extension cable
-Other parts as required
It was also confirmed that the heat generated from the hard disk could not be discharged while the NAS was being built and used. Therefore, it is recommended to put a cooling fan behind the case. Specifications are 80mm wide and 25T thick
Thank you for reading the poor English of Google Translator so far.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
![2.5" or 3.5" SDD/HDD caddy/adapter to 5.25'' [corrected]](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2Fc9%2F69%2F73%2F12%2F82%2Flarge_display_0.jpg&w=400&h=300)