Thingiverse
Simple Scount Wheel Hub
door ZDC
1
Downloads
5
Likes
0
Makes
Hubs fit 1.6mm / 1/16 inch rod (designed as a 2.5mm hole)
I cut 3 pieces of black 5mm foam and hot glued them together then I drilled the hole to fit the hub and hot glue it into the wheel.
I also hot glued the exposed foam to seal the wheel and used a piece of Gorilla / Duck tape on the outer diameter of the wheel to help from wear.
Note: I hot glued the tape onto the wheel.
I included a Step file to easily edit to suit your needs.
I cut 3 pieces of black 5mm foam and hot glued them together then I drilled the hole to fit the hub and hot glue it into the wheel.
I also hot glued the exposed foam to seal the wheel and used a piece of Gorilla / Duck tape on the outer diameter of the wheel to help from wear.
Note: I hot glued the tape onto the wheel.
I included a Step file to easily edit to suit your needs.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
