Simple Screen Door Latch

I made these door latches for our screened porch that has a standard wooden screen door. This is designed for a door with a thickness of 1.1in (28mm). This door latch is designed to use the door stop in the jamb as a latch post. The door latch is designed for a door stop width of 1.5in (38mm). Differences in the door thickness or door stop material will cause fitment issues which require changing the ScreenDoorInsideLatch and or the ScreenDoorLatch_HexShaft dimensions. Do not scale the hex shaft or screws as they will not function properly. This door latch is a basic design which requires holding the handle in the turned position to closed the door and latch on the door stop. The handles are assisted by printed springs to hold them in the latched position. Printing Instructions It is highly recommended to calibrate for the filament(s) you will be using since the tolerances for the hex shaft and handles/latches are close to prevent excess movement. Print all 3 plates which results in th