Simple Snowman - Multi Color - Snap Together

I designed this snowman last year when I was first learning Fusion so the answer was right but if I showed my work, oof! You can use your AMS and print by object but you can also split up parts and print with single colors since it all snaps together. The eyes, buttons(extras on plate #2), and carrot nose all snap in. The 3mf as-is should be a nice snug fit with minimal sanding on the smaller pegs if at all. The base and cylindrical connectors are a nice fit and did not require sanding. Just make sure your parts are aligned when pressing together. The ring on the hat prints fairly snug, but the scarf is a little loose so it has room to shift. The stick arms are the hardest part of the print and MAY require an extra go if they don't stick to the bed. My first try did not work so they've been lowered into the bed a bit so there's more surface area on the bed. I did not have brown nor more than a 4-color AMS so I left the sticks white, but obviously you can make them any color