Simple turntable

I have designed this turntable for simplicity and smooth performance. It utilizes a standard 22 mm bearing from an old fidget spinner. Features Easy to print: Optimized geometry; no supports required. Smooth operation: 22 mm bearing provides stable, low-friction rotation. Cost-effective: Reuses a common fidget-spinner bearing to reduce the bill of materials. Versatile: Suitable for display stands, small platforms, and light DIY mechanisms. Print Notes (recommended) Material: PLA or PETG Layer height: 0.2 mm Perimeters: 2–3 Infill: 15–25% Supports: None Assembly Press the 22 mm bearing into the hub until it is seated flush. If the fit is tight, lightly sand the bore; if loose, use a small amount of removable adhesive. PS. Don't mind the different color,s the filament ran out mid print