Simple two-part 3D printed lamp

A very simple two-part lamp.The lamp is made in a two-part design, making it super easy to assemble with four M3x8 screws. The lamp is designed with "easy printing" in mind, so it can be printed without support. The base has a "press-fit" holder for an E27 socket that is 38 mm in diameter. I bought mine at the local Harald Nyborg (a Danish hardware store, but the brand of the socket is Gripo). You are more than welcome to remix my model to fit your desired socket.There is a hole for a 15mm cord to pass through the bottom. The bottom also have support for four 15mm felt or rubber feet. The top of the lamp should be printed in Vase mode, which makes it flexible and better enables the light to pass through.Here is what you'll need:4 x M3x8 screws4 x 15x2mm felt or rubber feet1 x E27 socket (38mm for press-fit or remix the model to fit your socket of choice)1 x cord with switchMix'n'Match with my other lamps! https://makerworld.com/en/models/543803#profileId-461