Thingiverse

Simplex Ciniwhoop

by 1Smug_Bastard

25 Downloads

20 Likes

0 Makes

This is a remake of the Whirlygig Ciniwhoop to be printable as one entire piece.

Prior design: https://www.thingiverse.com/thing:4321086

Designed for the following hardware:

* 14 mm wide FPV Camera (Runcam Racer Nano)
* Brushless motors no taller than 20 mm. (Examples: Xing 1105,1204)
* SucceX F4 2-4S 12A AIO Whoop Flight Controller
* SucceX Whoop VTX 25/100/200mW Adjustable
* 3" Bi or Tri bladed Props

Maiden flight video: https://youtu.be/1YPUoP2Z_hc

Please note that this prints upside-down and that a .STL file has been provided @ 15% infill / .2 mm resolution. Print weight with PLA, 30-40 grams.

**Edit**

12-01-2020: Added build V2 on Rotorbuilds: https://rotorbuilds.com/build/25396

10-31-2020: Added updated files.Link to Rotorbuilds thread: https://rotorbuilds.com/build/25148

11-17-2020: Created a variant with a honeycomb wall to reduce weight.

ciniwhoop micro quadcopter multirotor Quadcopter Quadcopter Frame rotorbuilds whirlygig ciniwhoop micro quadcopter multirotor Quadcopter Quadcopter Frame rotorbuilds whirlygig

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format