Simplified Modular Filament Rack / Holder

This is a very simplified modular filament rack that has no frills, few parts, simple to print, no supports, prints flat for strength, and simple to assemble. STEP files are included if you wish to modify them further in Autodesk Fusion or whatever CAD application you fancy. Filament/Setup RecommendationFilamentI recommend something like PLA+, PETG, ABS, or ASA. Standard PLA will probably be fine but out of an abundance of caution try and use something higher quality. I used Polymaker Polylite PLA Pro for my parts which has been more the adequate. MachineThe rack modules are too large for the A1 mini. Any other of Bambu Labs machine (such as the A1, P1S, or X1C) will work just fine. You can print the optional end caps on an A1 Mini if you just happen to have a second machine to save time.Build PlateIf printing with PLA, I highly recommend the smooth plate. Bambu Labs sells them in the shop or as an alternative you can get a smooth PEI plate from Ideaformer which can be found on Amazon