Simulator Tee 40mm

TPU Simulator Tee, 40mm. Only 3.1gramA local club asked us to make a simulator tee with their logo on it, and this is what we came up with. A lot of testing was done with TPU for AMS (68D), TPU 55D and TPU 95A HF. There was some breakage with 68D and 55D, but only from very hard-hitting players. We've yet to see a 95A break. We're also gonna try 85A, but because of the bump up to a 0.6mm nozzle, their logo is unfortunately out of the question with this model. As you probably guessed, the height of the model is 40mm, which is one of the heights that the club requested. We also made a 5mm one with their name on it. Us printing these with their logo on, is the reason for the 0.08mm layer height (small details). We recommend 0.4mm extrusion if you decide to add your name or a logo to it, else you can increase the layer height to 0.20mm. We also recommend setting Seam Position to Random if you don't add a logo/name. We'll add the other profiles if we see that people are inte