Single Layer Quality Calibration Prints

Single Layer Quality Calibration Prints These are a collection of single-layer prints that can be used when testing print quality issues such as with flow ratio, z-offset, or pressure advance if you've noticed over or under extrusion when printing, especially of your first layer (which can greatly impact adhesion). Included are print profiles for 0.2mm, 0.4mm, 0.6mm and 0.8mm nozzle sizes. Each profile includes a 50x50, 100x50, and 100x100 rounded test shape that you can quickly print with minimal filament usage. You can print them as-is, re-arrange them, or copy & paste them to cover different areas of your build plate. One way I use them is to place a 50x50 square in each corner of the build plate, as well as one right in the center. In the updated print profile there is now a preconfigured plate with this configuration. How and when would these even be used? If you've noticed print issues and have started tweaking settings, you may want a quick and easy way to test print quality aft