Thingiverse
SKADIS Shelf
por originalmistake
16
Descargas
16
Likes
0
Makes
this model is a small shelf for the IKEA SKADIS boards.
you can store any small item(s) you wish on it. whether it be books or figurines.
the shelf is 20cm wide by 14cm deep, it can hold objects that are 5KG (11LB).
personally, i wouldn't put anything above 5KG on this shelf but you can test this at your own risk.
when putting the shelf on the SKADIS board, it has been modelled to fit snuggly in the holes so you will need to put some muscle into pushing it down.
please make sure you print in the same position as set in the files, this ensures you don't need supports.
below are what i use for this in case you need a guide.
you can store any small item(s) you wish on it. whether it be books or figurines.
the shelf is 20cm wide by 14cm deep, it can hold objects that are 5KG (11LB).
personally, i wouldn't put anything above 5KG on this shelf but you can test this at your own risk.
when putting the shelf on the SKADIS board, it has been modelled to fit snuggly in the holes so you will need to put some muscle into pushing it down.
please make sure you print in the same position as set in the files, this ensures you don't need supports.
below are what i use for this in case you need a guide.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
