Ski-doo LED sign

Ski-Doo LED signPerfect for garage Assembled Dimensions:Width: 28.5 inchesHeight: 6.5 inchesDepth: 1.25 inches Requirements:-3.5m white LED strip (Aliexpress)-12v 2a power supply (Aliexpress)-5.5*2.1mm DC Male Cable Connector 2pin (AliExpress)-7 M3x12 screw (Optional, each letter could be glued with CA glue)-7 M3 Bolt (Optional, each letter could be glued with CA glue) Instructions:1- Print all body STLs. For better result use ironing or set the top surface pattern to Hilbert Curve (add Height range modifier to the last layer only to save on print time)2- Join all 5 body parts with screws3- Install the DC Male cable connector4- Solder the positive and negative wired to the LED strip terminal5- Stick the led strip around each letter below the letter insert line6- Print the letter insert STL7- I usually add some hot glue here and there on the LED strip to be sure it doesn't unstick from the surface.8- Insert all the letter inserts9-Upload the result in the comment section :-) **Aliex