Ski Pulk 2015

Printed parts used in a ski pulk. All parts were printed in polycarbonate, nylon, or PET.

This design uses a Paris Expedition Sled, [65" epoxy poles](http://www.tapplastics.com/product/plastics/plastic_rods_tubes_shapes/epoxy_tubing/144) from Tap Plastics, a [6mm rope](http://www.rei.com/product/767610/new-england-6mm-accessory-cord-package-of-30-ft), an Osprey Hip Belt, and 1inch x 1mm webbing. I've been using various versions of this pulk for a few years and make a few changes each winter.

Then fins and brake are only needed for steep slopes and traverses. They're 3mm thick and designed to be printed with a 1.2mm nozzle, 1.5mm extrusion width, in vase mode.