Skubbies-Tuff peace

This STL file is recommended for FDM Printers! ● 3D Printing Time : Monocolor - 03 Hours 17 Minutes* (may vary according to you printer model) Multipart - 03 Hours 36 Minutes* (may vary according to you printer model) Multicolor - 11 Hours 50 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) ● Approximately Height: 10 cm 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) ● Line Width/ Nozzle: 0.4 mm ● First Layer Line Width: 0.48 mm / 120% ● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) ● Recommended Initial Layer Height: 0.16 mm ● Recommended Layer Height: 0.16 mm ● Others: We use (Archimedean Chords) for finishing the top layers, if you prefer. In “Keychain” use (Ironing Type) in top layers. ● Recommended Perimeters/ Walls: 3. ● Recommended Infill (%): 10% (Gyroid) ● Needs Support: No. ● Build Plate Adhesion: Yes.