Skull Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50.8x152.4mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA+ Numakers Light Gray Transmission Distance: 3.2 PLA+ Numakers Pure White Transmission Distance: 4.8 This print uses 3 unique filaments Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Light Gray At layer #16 (1.36mm) swap to Pure White for the rest.