Skull HueForge

SullForge ;)   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm   Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PETG JAYO Gray Transmission Distance: 2.5 PETG JAYO White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Green At layer #15 (1.28mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.