Skull Rhino Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 150x170.03mm in size You may print at higher layer heights below the Min Depth of 1.5mmThe Max Depth is 3.2mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #35 (1.52mm) swap to Grey At layer #39 (1.68mm) swap to White for the rest.