Sky Dragon Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 55x163.62mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.1mm and the Actual Depth is 1.8mm Filaments Used: PLA Aurapol Black Transmission Distance: 0.3 PLA Aurapol Grandma Grey Transmission Distance: 1 PLA Aurapol White Transmission Distance: 5This print uses 3 unique filaments (You can also use similar colors from other manufacturers) Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #13 (1.12mm) swap to White for the rest.