skyline

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 142.91x200mm in size You may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.64mm) swap to Red At layer #18 (2.24mm) swap to Jade White for the rest.Boost Me