Thingiverse
Skywatcher 150P Backcover with stand
di nneumueller
0
Download
2
Likes
0
Makes
A back cover for a Skywatcher 150P / 150PDS with a integrated stand. This allows the telescope to stand more stably when not used on a mount.
The cover can be screwed onto the telescope using M4 screws through the holes in the stands.
For this you need to drill holes in the back aluminium part of the telescope and cut threads.
Otherwise, it is also held in place by the adjustment screws.
Black PETG is recommended for printing. PLA is not recommended as it easily deforms when heated, e.g. by sunlight. Can be printed without supports.
Usage and any modifications are at your own risk.
The cover can be screwed onto the telescope using M4 screws through the holes in the stands.
For this you need to drill holes in the back aluminium part of the telescope and cut threads.
Otherwise, it is also held in place by the adjustment screws.
Black PETG is recommended for printing. PLA is not recommended as it easily deforms when heated, e.g. by sunlight. Can be printed without supports.
Usage and any modifications are at your own risk.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
