Slam Dunk Manga Cover #16 Hueforge

DESCRIPTION Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 115x181.47mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #13 (1.12mm) swap to Silver At layer #20 (1.68mm) swap to White for the rest.