Thingiverse

SlatVase1

by bbinnard

137 Downloads

129 Likes

0 Makes

This isn't exactly a vase, but it might be useful for holding certain things. A short video is here: https://youtu.be/GUujISe7qFE.

It started out as an experiment to see what I could make from an extruded and twisted rectangle. That is really all this part is comprised of. It printed in 38 1/4 hours with a layer height of 0.200 mm and a print speed of 80 mm/sec.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for SlatVase1?

Any FDM printer should handle SlatVase1 just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print SlatVase1?

According to the design notes, SlatVase1 takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SlatVase1 available in?

SlatVase1 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SlatVase1 free to download?

Yes, SlatVase1 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

SlatVase1

Add to Collection