Slide Shoes - Fully 3d-printed

Fully 3d printed slide shoesyou can actually wear them and they are very comfortable due to the high sole I printed them with the BIGTREETECH MorPhlex TPU Filament, which prints at 90A and then drops to 75A, therefore you end up with a very soft and comfortable shoe but without the warping and bad print quality as other soft filamentsif you also want to use this filament: https://tidd.ly/4mnOVXm (affiliate link)Important notes:You can adjust the hardness of the sole through the infill. For soft filament (75A), I recommend 14% or higher, and significantly less for harder filamentIt is for EU shoe size number 43 (male), but you can scale them to your size (use uniform scaling)If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bedI uploaded an .stl file without cut ("NoCut") on the bottom for better scalingThere are two ways to print th