Slide Soldering Clamp with Opt. Printed Spring

*** Updated Version here Clamp to hold various wire sizes allowing the leads to be more easily soldered together. Print this out of PETG, Easy ABS, or something a little more heat resistant than PLA. Having said that, it was purposefully made easy to print as those who do print from PLA or even PETG will likely destroy it after a while if they touch the clamps with the soldering iron. I wanted something stiffer than print in place springs so I used 0.7 x 7 x 25mm compressions springs (can be found on Amazon). Added a snap in printed spring. Easy, quick assembly.