Thingiverse
Small CAP Bolt Knob
door asimomagic
4
Downloads
10
Likes
0
Makes
This is the knob for M3 CAP bolt. I made it so that the fixing screw of the fan nozzle shroud of Prusa i3 MK3S can be turned by hand. It is convenient because the shroud can be removed immediately when cleaning the nozzle or replacing the nozzle. Of course, it can be used for other purposes as well.
Use long M3 CAP bolt and M3 hex spacer(long nut).
-M3 CAP bolt: original bolt length + 15mm (=35mm in case of fan nozzle shroud)
-M3 hex spacer: about the same diameter as the CAP bolt. The length is 10 mm.
.
The hole for the hex spacer is designed tightly, so pull in the spacer with bolt.
Use long M3 CAP bolt and M3 hex spacer(long nut).
-M3 CAP bolt: original bolt length + 15mm (=35mm in case of fan nozzle shroud)
-M3 hex spacer: about the same diameter as the CAP bolt. The length is 10 mm.
.
The hole for the hex spacer is designed tightly, so pull in the spacer with bolt.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
