Small domra wall mount 2 (updated)

Updated version of “Wall mount for small domra” model ( https://makerworld.com/en/models/2413679 ). Made of four parts: the wall plate, the domra holder itself, the wall panel and the soft insert for the holder. The rigid parts can be printed from any sufficiently strong plastic to withstand the load. The soft insert should be printed from TPU. The wall panel is made to protect the headstock and to avoid scratces from the wall. Assembly instructions:Insert the soft part into the corresponding cutout on the hook. Gluing is not necessary, as the cutout is designed to hold the insert securely due to its shape.Press the panel into the cutouts on the upper part of the hookAttach the wall plate to the wall using three flat-head self-tapping screws with a press washer, type DIN 968.Place the hook onto the plate from above until it clicks into place.______________________________ Изменённая версия настенного крепление для малой домры (исходная модель тут: https://makerworld.com/en/models/24136