Small Machine Vise

A small machine vise with interrupted thread for quick move of the jaw.It has stop gauge using an M4 threaded rod through the 4.5mm hole, adjusted either by the 2 M4 nuts holding the threaded rod or by loosening the M10 printed grub screws.Recommended maximum opening is at 85 mm.Recommended material is PLA+Recommended layer height is 0.2mm with 4 solid bottom and top layers.Recommended infill is cubic at 20% or moreThe part vise_grub_screw.stl needs to be printed 3 timesAn additional threaded rod or bolt M4x40mm and 2pcs M4 nuts requiredSupport is needed on the part vise_jaw.stlAll parts are correctly oriented for printing