Small Self-Watering Seed Starter 3x3

Parts The seed starter consists of 4 different parts (one of which is optional). The Basin & Basin Cap It holds all the seeding pots and serves as a reservoir. Through the small extension, you can quickly fill the basin. It can contain enough water only to water the seeds a single time. The small extension can also be capped to prevent water from evaporating. I recommend a minimum of 3 perimeters of wall thickness for the basin to ensure everything is watertight. The Seeding Pots The basin can hold up to 9 seeding pots at a time. The pots have a small hole in the bottom to access the water in the basin. The walls are thin enough to make them flexible when the seedlings need transplanting. The Basin Cover (Optional) If you like enclosing the basin and making a small greenhouse, you can print the basin cover. It is held in place by a couple of pegs in the basin, so the cover can easily be removed. I recommend printing it with a transparent filament so the seedlings can enjoy the extra light and heat.   Parametric Design (Blender Only) In the files, you can find a .blend file that you can use to adjust the dimensions of all parts. The options currently available are located on the pot object. These let you change the width, x-amount and y-amount for the pots, and all other parts adjust accordingly. Depending on your pc, it can be a bit slow to process. Printing Difficulty: I I: Novice printing knowledge Basic understanding of 3D printing principles and processes. Familiarity with operating a 3D printer. Able to follow step-by-step instructions for printing simple designs. Limited experience troubleshooting common printing issues. II: Intermediate understanding Proficient in 3D printing principles and processes. Comfortable with various 3D printer settings and parameters. Capable of handling more complex designs and making necessary adjustments. Able to troubleshoot common printing issues and optimize print quality. III: Experienced Extensive knowledge and expertise in