Small Shelf (compatible with SKÅDIS)

This is shelf designed to work with the SKÅDIS pegboard system. I utilise this for my office desk area. I have printed this model (using a P1S) in both eSUN Matte Black PLA+ and Bambu Labs Black PETG HF, both worked well. I print the model on its end, I use an inner and outer brim to help prevent warping/improve bed adhesion and I use manual supports (normal / build plate only). The result is a strong and good quality print. The supports do not leave the “hooks” looking great but the improved strength printing in this orientation is worth it (especially as you cannot see the hooks once fitted).The model is 120mm long with approximately 90mm of useable depth for holding items. There is a lip on the front for aesthetics and to prevent items rolling off the front. The hooks are located at 40mm and 80mm from the ends. This model is pretty strong, even at only 15% infil. The print is designed to be scalable in the sense that multiple can be placed next to eachother with little gap. I hope y