Small Shelf with Compartment For 3M Command Strips

This is a small shelf, with a usable area of 153x95mm and a compartment which is approx 35x90x155. The compartment is only accessible during installation in this version, since it was thought that the excess cord for the device on the shelf could be tucked inside, to be out of sight. This has not been test printed, however it is a simple design and it slices correctly. Please provide feedback if you make one, thanks! There is another version with a simple (accessible) compartment or drawer under the shelf, which you can find here:https://makerworld.com/en/models/632082 The legs have 120mm of space between them, and use large 3M command strips like these, or #10 screws to mount to the wall. The command strips are great for stuff like this, but if using them, a smooth PEI sheet is recommended (since the strips will stick much better to a smooth base). The command strips also seem to stick better to PLA, compared to PETG. There is a 2 plate BambuStudio 3mf profile for a Bambu X1C with 0.4