Slicer Discord
3DSEARCH / Gadgets / Small Vise (No Hardware Required)
Small Vise (No Hardware Required) – 3D printable model from MakerWorld MakerWorld
Gadgets

Small Vise (No Hardware Required)

by Ms · Gadgets
4.3k Downloads
1.9k Likes
2.1k Makes
Go to Model
这是一个方便小巧的台虎钳（60mm*110mm*40mm），夹持范围0-50mm。打印效果好，无需五金件，可更换夹持面，特别顺滑。 特点：旧台钳已经完全更新，全重新建模并解决所有问题。全组装自锁设计，无须任何辅助固定部件。全新的螺栓，易于3D打印，更顺滑，更易打印。全新的滑轨设计，侧面夹持时也能提供良好的结构强度。可更换夹持面设计，夹持面卡入丝滑，不易掉出，利用打印中的悬垂消除间隙。全新的卡扣连接，更稳定，无瑕疵。全零件均无需支撑，默认设置强度也很好，如有需要可增加墙层数进一步提高整体强度。 组装方法：将滑块放入轨道，顶在最大处。将螺栓旋入，并将螺栓头部顶入滑块。此时安装下方限位卡扣，并顶入到里面。旋转螺栓，安装完毕。 多种夹持面可更换： *新旧款台钳：建议打印新款，全新建模，打印完美，实用性强。
Category
Gadgets
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
2 colors
Single piece 2 colors / AMS Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Colors
2 (AMS/MMU recommended)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Small Vise (No Hardware Required)
Small Vise (No Hardware Required)
by Ms
↓ 31.5k ♥ 16.4k
Small Vise (No Hardware, Sturdy and Durable)
Small Vise (No Hardware, Sturdy and Durable)
by CCV
↓ 1.9k ♥ 1.1k
Small Vise (Fully 3D-Printed)
Small Vise (Fully 3D-Printed)
by TuTu
↓ 447 ♥ 162
Mini Vise (Only 56g, Fast Printing)
Mini Vise (Only 56g, Fast Printing)
by Ms
↓ 254 ♥ 152
Simple Table Vise
Simple Table Vise
by Iiro Laaksonen
↓ 125 ♥ 65
Printed Table Vise
Printed Table Vise
by Makerbara
↓ 68 ♥ 15
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection