Thingiverse
Small Vise
by KWolfie
163
Downloads
489
Likes
1
Makes
I made this small vise for little things like holding small components or pressing small things together. It is a quick and small 4-part print, with everything weighing about 24 grams when printed with 3 walls and 30% infill. I can make all the parts needed in about 2 hours, and that's using an old CR10 printer.
The vise measures 58mm L x 40mm W x 25mm H although the Threaded Rod sticks out another 15mm along the parts length. The vise has a large range of motion relative to its size and can open the jaw to a 39mm span (36mm span when using the Optional Jaw Plate). The vise is 22mm wide internally. The design is optimized for 3D printing, featuring only 45-degree overhangs, no supports, no brim/raft (unless you have build plate adhesion issues), and the Threaded Rod is printed horizontally to make the threads stronger and less likely to shear. The Threaded Rod includes a small built-in brim to keep the small knob in place. This brim should peel off and can be cleaned up with a blade
The vise measures 58mm L x 40mm W x 25mm H although the Threaded Rod sticks out another 15mm along the parts length. The vise has a large range of motion relative to its size and can open the jaw to a 39mm span (36mm span when using the Optional Jaw Plate). The vise is 22mm wide internally. The design is optimized for 3D printing, featuring only 45-degree overhangs, no supports, no brim/raft (unless you have build plate adhesion issues), and the Threaded Rod is printed horizontally to make the threads stronger and less likely to shear. The Threaded Rod includes a small built-in brim to keep the small knob in place. This brim should peel off and can be cleaned up with a blade
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
