Thingiverse
Hobby
Go to Model
Smartphone stand adjustable
351
Downloads
267
Likes
0
Makes
Adjustable smartphone tabletop stand (holder).
Suitable for smartphones approx. 170Lx80Wx12..15H mm, as it was tested on own device.
Angle and height can be set as desired. You will need 2 screws DIN912 M5x0.8x70 and 2 nuts DIN934 M5x0.8 for complete assembly.
December 2024 update.
Slightly reworked and improved overhaul design and quality. Added 4 cavities (optional) in stand's base plate for additional weights and extra stability (see simple drawing). I used car tire balancing weights 23x19x3 mm, 10g. each. Pause print at certain layer, put in weights, resume printing. No glue of fasteners required. Although it’s an experimental feature, you can print without extra weights, add additional supports instead.
Suitable for smartphones approx. 170Lx80Wx12..15H mm, as it was tested on own device.
Angle and height can be set as desired. You will need 2 screws DIN912 M5x0.8x70 and 2 nuts DIN934 M5x0.8 for complete assembly.
December 2024 update.
Slightly reworked and improved overhaul design and quality. Added 4 cavities (optional) in stand's base plate for additional weights and extra stability (see simple drawing). I used car tire balancing weights 23x19x3 mm, 10g. each. Pause print at certain layer, put in weights, resume printing. No glue of fasteners required. Although it’s an experimental feature, you can print without extra weights, add additional supports instead.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
