SN95 Mustang Lightbox

🔧 Lightbox Print Profile (WA / White PLA or Diffuser PLA)🧱 MaterialWhite PLA / Diffuser PLAMatte white works best (less hotspotting)Avoid glossy filament if possible📐 Core Settings (MOST IMPORTANT)Layer Height0.2 mm (standard)0.16 mm if you want smoother gradientsLine Width0.42–0.45 mmSlightly wider lines improve diffusion🌫️ Infill (Diffusion Control)Infill Type: Gyroid or CubicInfill %: 12–18%12% → brighter, softer glow18% → more even diffusion, less hotspotting💡 Never use 0% infill for lightboxes.🧱 Walls / Light BlockingWall Count: 4–5Wall Thickness: ~1.6–2.0 mmPrevents light bleed on borders and frame🔲 Top & Bottom LayersTop Layers: 0Bottom Layers: 4–5Light should pass through the front face only🌡️ TemperatureNozzle: 205–215°CBed: 55–60°CLower temps = cleaner layers, better clarity🚀 Speed (CRITICAL)Outer Walls: 30 mm/sInner Walls: 40 mm/sInfill: 50 mm/sSlow outer walls = smoother diffusion🧊 CoolingFan: 100% after layer 3Strong cooling improves clarity and prevents