Snake Hueforge

Project: MGS.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 83.76x112.07mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm PLA Black Transmission Distance: 0.3 PLA Gray Transmission Distance: 1.5 PLA White Transmission Distance: 5 PLA Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Ash Gray At layer #15 (1.28mm) swap to Jade White At layer #22 (1.84mm) swap to Red for the rest.