Snapmaker 2.0 webcam mount

This is a mounting arm for the Z-axis of a Snapmaker 2.0. Two lengths. Each length allows mounting a webcam; I think the longer arm gets a better angle on the print.

The Z-axis arm can be used to mount anything else - feel free to make new mounting arms! There is a cutout for a 3.5mm cable in the x-axis arm for cable organization. The small piece printing out in the middle is to seal that up (see pics).

I had a logitech C910 webcam laying around (remember when we used to buy webcams separate from laptops?) so I took it off it's mount and attached it to the mounting arm.

I used 2 M3 x 25mm screws, though you could probably get away with 20 mm. There are recesses for lock nuts or standard nuts; your call.

I printed in ABS with a 20-line brim for adhesion on the long arm. I'm guessing PLA won't need a brim, but I have an enclosure and wanted the long-term heat tolerance.

I used supports because of the overhangs in the cable management part of the Z-axis arm, but I'm s