Snapmaker J1 Top Riser with closeable ventilation slots

This is a riser for Snapmaker J1 printer, featuring closeable ventilation slots on each side.

The J1 Top sheet may be locked using neodym 2x10mm Neodym Magnets in the corners (eg. https://www.amazon.de/gp/product/B06X977K8L ).

You will need to print:

4x J1-Top-Riser_Corner.stl
4x J1-Top-Riser_Corner_BottomExtension.stl
6x J1-Top-Riser_FrontAndSideSlipProtector.stl
4x J1-Top-Riser_BackSlipProtector.stl
2x J1-Top-Riser_FrontConnector.stl
2x J1-Top-Riser_FrontLeft.stl
2x J1-Top-Riser_FrontRight.stl
4x J1-Top-Riser_FrontSeal.stl
1x J1-Top-Riser_SideLeft.stl
1x J1-Top-Riser_SideRight.stl
2x J1-Top-Riser_SideSeal.stl


Assembly instructions:

Print everything.
Grind the 6 seals on the top and bottom to make them slide smoothely.
Put the seals in the frond / side Parts. Move them a couple of times if thy do not slide smoothly.
Give each slider a knob of your choice. I used M3 screws with 10mm electronic spacers.
Super-glue the Corner_BottomExtension under each Corn