Snapmaker U1 Cover with Ikea Box

English VersionThis is an alpha version. I do not own a Snapmaker U1 yet and based this design solely on online 3D models. A print file specifically prepared for the Snapmaker U1 is included with the STL files, as I am unable to upload the print profile directly here. This is a top cover designed for the Snapmaker U1.It is made using an IKEA lid and approximately 1 kg of PETG filament.The required IKEA lid can be purchased here:https://www.ikea.com/de/de/p/samla-box-mit-deckel-transparent-s69440761/Technical DetailsThe lower part uses M4 heat-set threaded inserts.The upper part is fastened using M4 screws.Screw length must be at least 16 mm and no longer than 28 mm.A long front cutout is integrated to ensure good visibility of the display.Tolerances are tight. Please make sure your printer is properly calibrated before printing.Required Parts for AssemblyPrinted parts12× M4 heat-set threaded inserts12× M4 screwsNo additional parts are required.Deutsche VersionDies ist eine Alpha-Versio