Snapmaker U1 top cover

Work in progress. The design has its flaws, and this must be taken into account. For those who like to experiment.Here is my design for the SNAPMAKER U1 top cover. It was created so that it could be printed on this printer. Some elements require supports (top element), others theoretically do not, but for stability I had to add them anyway. The cover is quite light and delicate, but it should easily withstand normal use. The front door opens upwards. The hinges should theoretically hold, but the polycarbonate glass is large and relatively heavy.Boost MeThe design consists of:4 legs/feetbottom - 4 parts joined and gluedback - 2 parts joined and gluedside columns - each joined and glued from 2 partshingeshandleside and front walls made of 3mm polycarbonateYou will need:some M3 threaded insertssome M3 screws (probably two types)adhesive (e.g., epoxy)I will only share elements for the left side. Both sides are symmetrical.