Snoopy Christmas

Project: Snoopy ChristmasPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x130.61mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.56mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #0a2989 PLA BambuLab Basic Blue Transmission Distance: 4 #00ae42 PLA BambuLab Basic Bambu Green Transmission Distance: 2 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.6 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.6This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Cobalt Blue At layer #13 (1.12mm) swap to Blue At layer #14 (1.2mm) swap to Bambu Green At layer #16 (1.36mm) swap to Red At layer #21 (