Snow globe

You can use fairy lights where the battery box is 80 mm long or shorter. The switch has to be on the bottom of the battery box as shown in picture 4. If it isn’t, you can use the switch holder that I designed. My battery box had the switch in the wrong direction, so I simply extended the wires from the switch circuit board to the battery box. This is not necessary if you use one like the one in picture 5.In picture 6 you can see my electronics. If you want to build it like this, you can use the circuit board holder.You need:3× felt gliders3× M3 thread inserts3× M3 × 10 mm screws1× string of fairy lights1× plastic sphere with a maximum outer diameter of about 160 mm and an inner diameter of at least 150 mm. The sphere must have a divider in the middle.A few napkinsSome napkin glue (other glue should also work)Assembly:Make a hole in one half of the sphere for the cable. Then glue pieces of napkin onto the sphere, possibly twice, and also on the middle divider. After that, glue the inser